1. Exclusive use of bayonet frame, easy installation, use tape or screws(including) to fixed the frame, the lights can be removed at any time, convenient and flexible.
2.2. Using mirco-USB charging, after full charge can be used a few week, You can forget about to replace battery.
3. The use of human infrared induction principle,high sensitivity, without sound and needn’t switch control, powerful guarantee for quiet living spaces.
4. High bright, low power consumption, long operating life, energy saving.
5. Long operating life of over 50,000 hours or more.
6. Environment protective material, flexibility and high brightness.
7. Ideal for the bedroom, baby room, closet, closets, cabinet, corridor, workshop, basement, garage, stairwell, oil depots, roof, door, drawer, trunk, garage entrances and other places.
LED Quantity: 18 pcs
Battery type: Li battery
Material: Aluminum + ABS
Sensor Range: up to 3 meters, 120 degrees
Size: 30x 4x 1.5cm (11.8x 1.57x 0.59 in)
Weight: 180g (6.3oz)
1 x Motion Sensor LED Light
1 x Bayonet frame
1 x mirco-USB charging cable
2 x 3M Adhesive
2 x Screws
1 x User Manual
1. Please put the motion sensing led night light in totally dark space, in this condition, the sensor will be very sensitive and it will light up once detecting movement. If the space is not totally dark, it may influence the light’s sensitivity. Sometimes, if other light source is too bright, it may lead to this LED Light Bar can’t light up.
2. Please don’t put 2 lights too close and please don’t use them at the same time, due to they will influence light’s motion sensitivity reciprocally and it will lead to both lights can’t work well.
- 【INTELLIGENT SENSOR】Under auto mode, the cabinet light will auto on when motion detected within 10ft and auto off if no activity for 15s. Smart sensor mode helps prolong battery life. The under cabinet light will turn on only when activity detected in the dark under auto mode.
- 【SUPER BRIGHT】Up to 80lm output, the bright 18 LED beads inside the light provide you enough illumination for any dark place, no more chaos in the dark.
- 【3 LIGHTING MODES】There are on/off/auto modes to meet your diversified lighting needs. Just push the button on the closet light, you could choose constant lighting mode or auto sensor mode.
- 【USB RECHARGABLE】Use the packaged USB cable to charge the led night light, one full charge takes about 1.5h. After charging just put the cabinet light back to where you need light in the dark. The motion sensor night light is very suitable to illuminate any place that have limit or no access to electricity.
- 【EASY INSTALLATION】Comes with 3M adhesive strip and screws, the cabinet light is very easy to install, you could stick or screw the frame anywhere and switch the light between 2 places including kitchen, cabinets, wardrobe, entrance, hallway, stairs, garage, etc.
Detailed information available on our homepage…